What to do if the hair clipper is broken

1. The head of the hair clipper does not rotate or rotate abnormally
Repair method:
(1) Remove the cutter head, clean all parts of the cutter head, and check whether there is hair entanglement in the motor, after cleaning, install the cutter head and try again;
(2) Remove the cutter head, turn on the switch, and check whether the motor is rotating. If it does not rotate, connect the charger and try again. If it still does not rotate, the motor or rechargeable battery is malfunctioning. Please contact the seller or manufacturer to replace the motor or Rechargeable Battery.
2. Hair clipper clip hair
Repair method:
(1) Pinch the blade with your hand. If you can hold it gently, the battery will be insufficient. Use it after charging.
(2) If you connect the charger and use it, you can still hold the blade gently, then remove the blade and clean the blade and body. If the fault persists, the motor or rechargeable battery is faulty, please contact the seller or manufacturer Replace the motor or rechargeable battery;
3. The power indicator does not light up when the hair clipper is charging
Repair method:
(1) After using all the stored power of the hair clipper, connect the hair clipper to the charger and use it. If the hair clipper can be rotated and used, the charging system is intact, and the indicator light bulb is in poor contact or damaged. However, since it does not affect normal work, no treatment is required. If you need to replace it, please contact the seller or manufacturer.
(2) If the charger cannot be used after being connected, it means that the charging circuit is malfunctioning. Please contact the seller or manufacturer for repair.
4. The hair clipper cannot be charged
Repair method:
Connect the hair clipper to the charger, if the hair clipper can be used normally, but after 24 hours of charging, the hair clipper cannot work normally or the working time is less than 10 minutes after the charger is unplugged, it means that the rechargeable battery is aging , Please contact the seller or manufacturer to replace or buy a new product.
5. Can't manage hair loss
Repair method: The cutter head has been severely worn and needs to be replaced; the cutter head lacks lubrication and needs lubricating oil maintenance.
6. The hair clipper makes a loud noise
Repair method: the screw spring adjustment is not good. Update and adjust each screw.
7, hair clipper leakage
Repair method:
(1) The insulation of the coil lead wire is damaged. Re-treat the lead wire insulation.
(2) The power cord is damaged by twisting and internal damp. Replace with a new power cord and re-insulate it.