What are the main classifications of electric shavers？

Men can dress up carefully without applying powder and fat, but they must have a razor. A man can be said to be a lifelong loyal partner. Every morning we use her to "clean up the door" for ourselves and give ourselves a refreshing smile. So how much do you know about such a familiar partner? Manual razors have always accounted for more than half of the market's sales. With the continuous introduction of new products, the position has been increasingly consolidated and strengthened. Electric shavers can be divided into rotary type and omentum type according to their working characteristics, both of which were developed from single-head shavers in the 1970s. There are mainly the following categories.

(1) Straight razor: It is cylindrical, with a permanent magnet DC motor in the middle, with moving and static blades on the top, and a battery box at the bottom. The razor holder is equipped with three blades, and the outside of the razor holder is a static mesh hole knife.

(2) Elbow type razor: The structure of this type of razor is basically the same as the straight tube type, except that the motor and the rotating head part are at a certain angle with the lower battery box part, which can be fixed and movable at 90° There are two types of non-fixed angles. It is more convenient to shave the beard while holding the shell, and the shape is more beautiful. There are two types of shapes: round and approximately rectangular.

(3) Horizontal razor: This type of razor has two parts, one part is a rotary razor, which is used for shaving short beards. Its structure is similar to the above two razors, and the cutter head is installed on the side of the blade body. . The other part is a reciprocating rolling cutter, which is used for rolling long beards. The sideburns and hair angles can also be used with reciprocating cutter heads, which imitate the working principle of manual faders.

 (4) Double-head shaver: the motor drives the two shaver holders to rotate through the linkage oil and gears. The cutting area of ​​this razor is larger than the above three types, and it is more suitable for people with more beards.

At present, most of the electric shavers available on the market are rotary electric shavers with circular mesh outer blades. The outer blade of this electric shaver is a porous circular mesh cover with a hole diameter of 0.5-0.6mm, and the inner blade is made of stainless steel with a thickness of 0.07-0.08mm. There are 3-4 blades installed on the blade holder to become a rotating The movable blade is driven by a micro DC motor. It has simple structure, low price, low noise and good shaving effect, especially suitable for people with small and dense beards.